TEMPERATURE CONTROLLER COMBO POWER & THERMO CABLE

COMBINATION POWER & THERMO CABLE

Compatible with other controllers of USA origin, these quality, simple to set up and use controllers feature:

• Fully self-tuning, microprocessor-based PID control.
• AccuComp Cycle power drive for reliable and precise control.
• Zero crossing triac triggering for minimum RFI.
• Automatic Ramp Start to prolong heater life.
• Process temperature readout operation even in manual mode as long as the thermocouple (T/C) is intact.
• Automatic T/C break protection and cold junction compensation.
• High impedance potentiometric input allows long distance T/C wiring.
• High voltage T/C input circuit protection.
• Computes all desired adjustments instantaneously.
• Remembers final set point and manual power setting after 3 seconds.
• Set point lock feature.
• Automatic T/C break hold.
• Data communications with Interface Module and IBM PC or compatible.
• Touch key pad controls.
• 100% solid state circuitry, no mechanical relays.
• Completely self contained, no external output devices or power supplies required.
• Fast acting fuses are provided on both sides of the AC line.
• Electrically isolated with grounded front panel for operator safety.
• Plug-in design for module interchangeability.
• Sealed front control panel.
• Accuracy with 0.5°C.
• Two year warranty.

Single Zone
230V x 50 cycle x 10amp cable input and 5 pin output plug for connection to the heater and thermocouple.

Twin Zone
230V x 50 cycle x 10amp per zone, these have clamp-in input and two 5 pin outputs.